Conveyor working process

Face to keep straight. If the face is not straight, will make two chains ranging tension will lead to the end of the chain or cause uneven wear chain off road, stuck or broken links.
conveyor bend to fit, not a "chicane", Concrete block machine  not less than eight curved portion chute, before and after passage of hydraulic jacks to the attention of co-ordination and avoid sharp bends. Otherwise it will cause the wrong chute mouth, causing chain scission off accidents, paying particular attention to stopping the conveyor can not be over.
Conveyor shop was to be flat. The chute of the restriction, it is only in the vertical direction to adapt to the 3'-5 'of the change, so if the local unevenness face plate should be smooth. And laid flat conveyor scraper chain in favor of the operation, the chute can be reduced the wear and the power consumption is reduced.
When blasting is in progress, concrete mixing machine the conveyor and pipeline transmission, the unit cables, switches and other good protection. When the conveyor transporting iron materials, long material, security measures should be developed to avoid personal injury.
End and intermediate transition slot machines slot lap joints are not allowed to have too much bending, bending is applied when there is wood pad.
 Special attention vibration coupling, the conveyor starts checking fluid coupling vibration, in order to protect the good thermal conditions should always clean the protective cover and the liquid