(1) Check the lateral centerline of the conveyor roller longitudinal centerline misalignment. If the misalignment exceeds 3mm, you should use idlers elongated mounting holes on both sides to be adjusted. The specific method is biased which side of the conveyor, concrete batching plant advancing group which lateral direction forward, backward, or the other side.
(2) Check the head, tail rack bearing two plane deviation. If the deviation is greater than two planes 1mm, the response to adjustment of the two planes in the same plane. Head drum adjustment method: When the right side of the drum belt deviation, the roller bearing right or left should move forward bearing backward; if the conveyor belt deviation to the left of the drum, then roller bearing should be left or right to move forward bearing after the shift. concrete block machine adjustment method and the head drum opposite.
(3) Check the position of the material on the conveyor. Material in the conveyor belt is not centered on the cross-section will cause belt deviation.
If the material is biased to the right, then the belt deviation to the left, and vice versa. Should be used as much as possible so that the material centered. To reduce or prevent such deviation increases the blocking plate conveyor, to change the orientation and position of the material.
没有评论:
发表评论