Concrete mixer Procedure

1, the column on the function toggle switch to position "Auto" position, press Start switch on the controller, Concrete mixing plant will run automatically control their own Operation.
2, the whole process has finished running automatically stop running the project for the Transit stop, press the stop button can then be restarted.
3, press the start button, the display shows the start time, slow, Sand, fast, stop, fast, running lights shining on time.
4, automatic control, you must put all the manual functions appropriated stop switch Position.
Operational considerations:
1, Concrete Mixing Truck by measuring the regulation blade and the gap between the pot wall shall 3mm ± 2mm, If the gap tolerance, the vertical position of the blade can be adjusted to achieve the specified range Wai.
2, stirring after each use leaf, pot should be clean, Electrical DivisionPoints should avoid strenuous vibration, away from water and heat, pay attention to dust.Know the mixer to use, in order to better improve project efficiency.